基础管理器

Base Organizer for T9 USB Clippers

2024-01-14 12:52:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Base and accessory organizer for the T9 USB hair clipper.
Specifically, this one: https://www.aliexpress.us/item/3256804684435835.html
I bought the smooth body black one, but I suspect it would fit most of the similar models with minimal mods.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20
Infill:
8%
Filament brand:
BuMat Elite
Filament color:
Black
Filament material:
ABS
Notes:
I printed in ABS, which shrinks a little. This required me to print the model at 102% for a perfect fit. You may need to make a similar adjustment (or not), depending on which material you choose, and your particular machine settings. As always, YMMV.

Post-Printing

Very little post-printing clean-up should be required. Simply remove the supports from the main USB tunnel and the little discs from the feet recesses, if you intend to install rubber disc feet.

The USB cable can be pressed into place, and the cable part pushed into the wavy groove in the bottom to secure it. For skinny cables, a little glue may be needed.
I used a braided cable from Dollar Tree, which had a nice combination of toughness and flexibility.

Make sure you orient the plug the right way to interface with the charge port on the clipper.