Croc Charm Jibbitz Fridge Magnetic Pen Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
JibbitZ/Croc Charm and Pen Holder for your fridge or toolbox ;P
This is my unique design, however remixing is encouraged :) and please link me in on your remix!
Print in place, supports not needed. go slow on the first 20 layers and after the pen holder is complete, then set to default profile speed.
Magnets are available at any 2 dollar store craft section and see the attached photo of the ones I used. Ensure you clean with alcohol spray to clean contaminants before applying superglue.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK4
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:15%
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PTEG will stand up to it being dropped
- Notes:
Run with 4 walls for strength and the infill will be less.
Print with a brim for stability at height.
PTEG will help it survive a drop off the fridge if it ever happens.
Post-Printing
Use a deburring tool (or sandpaper) to round the edges upon removal of the brim.
How I Designed This
Good old Tinkercad!
Tags
License
Croc Charm Jibbitz Fridge Magnetic Pen Holder
by schuy is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Quad博士的机械蝉2023-05-19 -
IKEA Skadis 支持 8 端桌面 USB 充电站2024-03-19 -
末世未来人类防卫军：火炮部队（FDM友好版）2024-04-04 -
Fidget 3D模型2024-04-24 -
A&E Dometic Catalina 2500遮阳篷末盖2024-05-01
最热下载
-
Valorant 杰特的姿态2023-03-26 -
车身RC 1/10 全套2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Dado - 立方体模型2024-03-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
鞋带锁2025-07-17 -
巴黎卢浮宫的三圣母像2025-07-16 -
一体打印行星齿轮2025-07-15