零浪费：庆典

0-waste: Jubilee

2024-01-14 23:13:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A robot that is articulated and poseable. It is designed to be fdm friendly and supportless. Does not require glue.

No support, no overhangs, no bridges, no climbing over 45°.
No glue and no screws are needed, you already have everything tou need.
My model has to be printable, assemblable an playable with a setup far from optimal.

The model has 13 point of articulation, every joint is designed to have some amount of elasticity and to be printed and put together even if the printer used is not the most precise.

There are 4 files: one for each color, the parts are oriented in a way that does not require supports.

The armor can be hold in place by some 1.75mm filament.

The assembly of the robot is quite straightforward and if you end up with an alternative model...well, post it! :)

Almost every part of this robot is interchangable with my other 0-waste models.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
20%
Notes:
I suggest 0.1mm on layer height and at least 1mm on wall/top/bottom thickness.

Lore

Do not expect to see this model working on a shipwreck or collecting material from an impact site or minig on an asteroid field.
This is the model that a large corporare want as a security service.
It is unlikely that the robot is owned by the pilot due to the elevate cost of purchase and maintenance.