水平星云支架，用于Lack品牌产品。

horizontal Nebula pad mount for Lack enclosure

2024-01-15 00:56:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I like balla's guppyscreen (https://github.com/ballaswag/guppyscreen) on my Creality Ender 3 v3 KE, but since I use my old Ender 3 IKEA Lack enclosure, there is no room inside to mount the Nebula pad horizontally.

Also, I like to have the display outside so the doors could remain closed when printing ABS or the like.

I searched a bit and than decided to use the brackets from https://www.printables.com/model/561871-hyperpixel-4-lack-enclosure-mount (included, but all credits go to @vinnie_289722 and @EmmaL_101520 )
and my self designed pad holder, inspired by the original holder.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
I used 33% gyroid
Filament brand:
Geetech
Filament color:
black
Filament material:
PLA
Notes:
There is no KE in the Printer Models ;)

Post-Printing

Just use M3 heat inserts and short (6-8mm) M3 screws to mount the brackets to the holder.
You have to find or make an extension for the 10 pin flat cable from printer to pad.
I used https://www.amazon.de/dp/B08QGV9765, but you can build your own extension e.g with DuPont cables, which happen to have 2.54mm pitch like the flat cable. Just be careful to connect all pins 1:1. Or use flat cables and one female and one male 10 pin connector.

How I Designed This

I am no designer, so as always in such cases, I tried my best with OpenSCAD (and the rounded corner module https://danielupshaw.com/openscad-rounded-corners/)

水平星云支架，用于Lack品牌产品。

朋友，你觉得上面这个模型，属于下面的哪个分类？