Skywatcher 250P 三巴赫金诺夫遮光罩 - 适用于较小型打印机的拆分版本

Skywatcher 250P Tri Bahtinov Mask - Split for smaller printers

2024-01-15 05:29:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Skywatcher 250P 三巴赫金诺夫遮光罩 - 适用于较小型打印机的拆分版本

Summary

I split tomboland's design up so that I could print it on my Ender 3 S1 Pro with a 220x220 print bed. I have labeled (small print on the rim) each which side each section matches because the split may not be exact. I printed each of the three sections and then friction welded them with a Dremel and some filament. You can look up friction welding if you are not familiar with it. Super glue did not work for me.

I have included Tomboland's instructions from his post below.

https://www.thingiverse.com/thing:4769083

This is a tri-bahtinov mask for the Skywatcher 250p. The tri-bahtinov is similar to a traditional bahtinov mask, but it gives you an indication of your collimation at the same time as focus. I generated a 2d SVG from this page: https://satakagi.github.io/tribahtinovWebApps/Tri-Bahtinov_symmetric.html

From the SVG, I extruded and worked on it a bit in Blender. The parameters I chose for the generator were specific to my scope, resulting in an aperture of 254mm, focal length 1200mm, and central obstruction 50mm. The STL provided is basically the thinnest you can get away with, but if you want it to be more sturdy, just scale the whole thing in the z-axis. I scaled it so that the main plate was 6mm thick, and the lip around 10mm. Completely over the top, but I like it! The wafer thin version works just fine, but could be a little fragile.

The outer diameter is 285mm, which is too large for many printers. I printed it on my Ender 3 Max.

It works like an absolute dream, and it's quite beautiful when focusing in on a bright star.

More information available here: https://satakagi.github.io/tribahtinovWebApps/Tri-Bahtinov_symmetric.html