LilyGo T-Beam 外壳（带按钮孔与手柄）

LilyGo T-Beam Case with Button Holes & Handles

2024-01-15 05:43:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a LilyGO T-Beam Case I designed for my three units. The case features holes on the bottom that allow the use of buttons made from old LEDs to be inserted to actuate the smaller board buttons. The legs of the led need to be cut-off flush to the bottom of the it. And the holes may require some filing to open up and fit the LED you're using.

It also has small openings in the inside corners which line up with holes on the T-Beam board that I used to fill with a 3D printing pen to secure the board to the case.

This case and optional carabiner clip holder requires the use of 3mm heat inserts and 3mm screws.

The holes used for the inserts were printed using a modifier to change the walls layer count to six.

Feel free to use and or modify this design for your own needs.