丰田 MR2 SW20 车型壁画艺术
Toyota Mr2 SW20 Silhouette Wall art
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a model of a 1991 Toyota MR2. It is printed in 3 parts I printed it on an Elegoo Neptune 4 plus. The three sections roughly measure 320 mm from end to end there is enough tolerance in the tabs that they should be able to be scaled smaller. I wound up heating a nail and fusing it into the backside of the print to hold the sections together. I would also recommend just hanging with one nail on the wall like I did.
Print measures about 3 feet 2 inches (0.96 Meters)
Happy Printing!
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 4 Plus
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:Draft
- Infill:15%
- Filament brand:
Elegoo
- Filament color:
Black
- Filament material:
PLA
- Notes:
I wound up heating a nail and fusing it into the backside of the print to hold the sections together.
Tags
License
Toyota Mr2 SW20 Silhouette Wall art
by EvanTheHof is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
平滑的脑科学奖2023-03-27 -
快乐之城：Grozilla插入模型2024-01-17 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
创业2024-04-24 -
简约设计门把手适用于QIDI Q1 Pro2024-05-03
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
裸女站立2025-07-16 -
一体打印行星齿轮2025-07-15 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
大码动漫女战士2025-07-15