0-waste:皮肤行走腿部

0-waste: Skinwalker legs

2024-01-15 16:24:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A set of alternative legs compatible with my 0-waste models.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
20%
Notes:
I suggest 0.1mm on layer height and at least 1mm on wall/top/bottom thickness.

No support, no overhangs, no bridges, no climbing over 45°.
No glue and no screws are needed, you already have everything tou need.
My model has to be printable, assemblable an playable with a setup far from optimal.

There are 2 files: one for each color, the parts are oriented in a way that does not require supports.

Lore

Those legs are designed to run in the rocky desert and to jump between canyon.
Expect to use something like the 150% of the usual power and to carry very little weight, many pilots are removing the armor plating from the frame in order to have the best performances.

If you have to recover something very little but very expensive, or if you are in an "hit and run" mission...those is what you need.

Tags

0-waste joint Mecha poseable

License

CC BY-NC-SA

0-waste: Skinwalker legs
by 70r71 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

0-waste:皮肤行走腿部

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载