SeizupFPV 肥猫 V1 5寸TPU部件
SeizupFPV Fat Cat V1 5in TPU Parts
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
TPU Parts for SeizupFPV's Fat Cat V1 5in frame.
-
CapBuzzerHolder - designed by HrollFPV, mounts behind the FPV camera. designed for 35V 1000uF Low ESR Capacitor and 10mm buzzer
-
Fat Cat ELRS - mounts to the bottom rear of the frame, designed for the happy model/radiomaster EP1 antenna
-
Fat Cat Foot C - Snap on TPU foot (motor screws not used)
-
Fat Cat Foot E-1 & E-2 - 2 part foot that is held on with motor screws. E-2 print in PETG for Skids and E-1 in TPU for carbon protection
-
Fat Cat Front Bumper L & R - carbon protection for the camera plates and mounting of the FPV camera. Designed for the 2 screw 19mm Walksnal Pro Camera, Others may fit.
-
Fat Cat Front Bumper L & R DJI Cam - same as above but for the single screw DJI Polar Cam.
-
Fat Cat Session Mt - 25Deg GoPro Session mount
-
Fat Cat Tail - Vtx Antenna mount including ELRS EP1 mount tray. Designed for Foxier lollipop 4+
-
Fat Cat Top Plate Plug - fills the cat head holes in the top plate for nothing more than a pop of colour. covers the sides of the top plate the protect the battery strap. Full version for the non modified top plate. XT60 version for a top plate modified to have the XT60 pass through the 1st cat head.
- Fat Cat Arm Guard - to protect those motor wires so bad things don't happen
All designs have been printed and checked for fit. Printed with Sunlu 95A TPU. Use supports as needed.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
- Infill:100%
- Filament brand:
Sunlu
- Filament material:
TPU 95A
猜你喜欢
联系我们
热门推荐
-
平滑的脑科学奖2023-03-27 -
保时捷968型号前置和（敞篷）后置 4英寸扬声器支架2024-03-23 -
无图标 H1 - Heltec V3 外壳2024-04-15 -
创业2024-04-24 -
Hante计时器适配器适用于Daisy 880气枪2024-05-02
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
拒绝的手势2024-04-19 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16