RS-97便携式磁铁盒

RS-97 Handheld Magnetic Case

2024-01-15 22:55:58

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

I have this neat little hand held emulator that never got enough love to get it's own 3rd party case, so I made it one.

It uses magnets to hold the two halves together. Here is how I instlled the magnets.

Enjoy!

Required parts::
2x1 mm Neodynium Magnetic Dots (You get 1000 for $9, Amazon ASIN:B092MB697H)
Super Glue
Water Based Acrylic Paint (optinal)

Line 20-30 magnets up to each other so that they form a stick.
Once the print is done and cooled, place a really small amount of Super Glue into each hole. Seriously, a drop is too much.
Use the "stick" of magnets to deposit one magnet at a time into each hole in the top half of the case. To make sure the magnets are all "poled" the same way, always deposit magnets into the case with the same side of the stick.
When you install magnets into the bottom of the case, use the other side of the magnet stick.

If you want to add paint to the embossed lettering on the top:

I used water based acrylic paint, but any water based paint should work. I used an old gift card to apply the paint like a squeegee.
Then used a damp paper towel and a flat surface to wipe off all the paint that didn't go into the recessed area. You can do this a few times if needed.

If you wat a deeper color, or better coverage, wait for the paint to dry and repeat the process.

朋友，你觉得上面这个模型，属于下面的哪个分类？