Logitech G502 32克外壳

(~32g) Logitech G502 Shell

2024-01-15 23:10:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Custom Designed shell, for the Logitech G502 Hero Wired mouse.

The shell can be printed without supports, but be sure to have good bed adhesion, for the two mouse buttons, that need to be printed on their side, to have the most strength.
All Screws, that are used in this build, are contained in the original mouse.

The shell only uses the two mouse buttons. In my version, i have de-soldered all other switches (The 3 Kailh switches + The two middle mouse button switches), and removed the daughterboard with the side buttons. I have also added grip tape to the flat surfaces, so the mouse doesn't just slide away.

The screw holes are a bit delicate, so just be sure to be careful.

You can add your own cable, with less drag, i just didn't have one available.
You can also use your own mouse-feet, as i haven't made any "templates" for mouse feet, but it should work for all of them. I have used G305 feet.

A big thanks to the original creator, as i wanted to do this in the past, but really didn't want to measure everything. Since this is his work, the shell uses all of the original G502 screw holes, and pegs, to make sure it sits as steady as possible.

(My phones camera decided to give up, so the photos are a bit blurry.)