皮管持有者 3D模型

Pipette holders

2024-01-16 00:09:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Pipette Holders

This modular holder was made to be able to resist the seismic conditions of Chile and is an easy-to-use holder for pipettes in general. We have designed multiple versions, all of them available here, to adapt the holder to most shelfs and surfaces. If you want to create your own version, freely access ourOnline CAD model, where you can copy and edit the original files.

The holders can be plugged into each other due to the side connectors, creating sets depending on your necessities.

The 3D model was created using Onshape, if you want to know how to use this software, go to our YouTube tutorial, where we explain everything about this.

This lab tool was designed for holding almost all types of pipettes, dividing them into three groups, the types A, B, and C, specified below.

Designed and tested by Tobias Wenzel and Matías Hurtado Labarca as a part of the LIBRE hub project.

Some of the brands that work with these are:

Type A:

Eppendorf

Type B:

Rainin
Axygen
Thermo

Type C:

Corning
Labnet
Gilson (with it's hanger)
Discovery
DragonMED

Onshape values for the pipette types:


Type A:	Hanger Pin Ø:	14 mm.
	Elipse Width:	22 mm.
	Elipse Length:	33 mm.
Type B:	Hanger Pin Ø:	18 mm.
	Elipse Width:	23.5 mm.
	Elipse Length:	39 mm.
Type C:	Hanger Pin Ø:	22 mm.
	Elipse Width:	26 mm.
	Elipse Length:	43 mm. (for 30 mm. Pipettes)