爱之灯

Love Lantern

2024-01-16 00:24:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

6 sides Love Lantern with changable panels and top and bottom parts

4 base parts to choose from
4 top parts
11 panels
bars to connect bae and top part

4 test files to check if your slicer and printer settings are right

To assemble put 6 bars in the bottom part all the way till you hear and feel a click, then top part, then panels
You can disassemble it and assemble again if needed (like to store the lantern to use less space)

It should be safe to hold the lanter by the top part but it depends on your prints (if it was hard to assemble it will hold stronger
You can additionally use a string around bars. The have some cutouts on the top.

May be best with led tealight but real flame ones will work too
If you want the light to fall on the wall use original panels (with holes). To view the lanter from the front side it should be better to use diffused versions ('5hearts' and 'hearts2' panels on photos where printed in diffused versions)

Some few more free panels (the original lantern):
https://www.thingiverse.com/thing:4980128

My Tealight Collection:
https://www.thingiverse.com/c47_3d/collections/26923844/things

Based on my Lantern and my LoveCube