3D钥匙挂架

Keys post holder

2024-01-16 02:34:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Another drawing and 3D print. This time a hallway accessories when you come home and hang up the keys and put received post to storage so that they dont lay down on the table.
There are three front versions so choose which one you want. The blank one can be used for about anything.
Just put together and use superglue to bond parts. Key hooks are made that you can just insert them and use no glue, or glue them or put a thin wire through the whole set. The hole size is 1.5mm.
You can print also a "pencil case" but not necessary to store pencils to be handy when you need to sign some package that arrived.
There are mounting holes on top if you wish to use. I use double sided tape to put it on wall and pins to cover the hole.