SnapCollar - 自锁领结套环

SnapCollar - self-locking collar cuff

2024-01-16 04:30:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

SnapCuffs

self-locking collar with print-in-place hinge and compliant-mechanism lock
easy to put on - printed in a few hours

Updates:

29.12.24: Added a printed ring to eliminate the extra D-Ring

Description

This is the SnapCollar, which can be perfectly combined with the SnapCuffs.
It features the same hinge and complaint-mechanism lock as the SnapCuffs, but features 2 printed rings to attach 2 cuffs to it.

I added the collar in a variety of sizes, as it needs to be printed precisely for your collar circumference.

Which size to use

Measure your collar circumference as described e.g. here in mm and take the larger size. If you need a custom size, just message me and I'll likely generate it for you.

How to print

add support for the ring and the hook, the lock has integrated support
Use PETG if possible, as it is less brittle
I print with 40-50mm/s on CR10s Pro and full speed on P1P, but that depends on your printer
light colors look much better IMO :)
remove the small nibble in the lock with small pliers
print the key and test it before applying the collar!

Additional Things

The key can be found here

Have fun! :)

Post-Printing

After printing, remove the added support as well as the little nibble inside the triangular key opening.
If necessary, file the inside of the collar to be more comfortable to wear.
To activate the hinge, open and close (not completely) the collar a few times. It will get softer over time.
The lock is the part, that can vary greatly between printers and materials. I noticed, that PETG is much more forgiving and less brittle, so preferably use that material.
Try to close the collar gently for the first time, maybe wiggle the lock a bit to soften it a little before closing. Once the collar is closed, try to open it by pulling strongly. If it keeps close, then good job! If not, bend the lock a bit with a screwdriver, but be careful there with PLA.
This bending has to be done after some close cycles to keep its lock closed.