绝地武士飞行器壁挂装饰

Star Wars Jedi Starfighter Wall Mount

2024-01-16 08:08:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A wall mount for the Star Wars Eta-2 Actis-Class Jedi Interceptor (also known as the Eta-2 Actis Jedi Interceptor, Jedi starfighter, Actis starfighter, Jedi interceptor, or simply Actis) toy from Hasbro.

I made this a few years ago and just realised I never shared it here! (you can probably tell from the images that I have since removed the double door I originally placed them above, and they're now no longer nicely aligned lol)

The mount was made for hanging my Jedi starfighters above my double doors, so the ships to have a slight downward tilt to them if you rest the centre nub on the grooved middle part of the arm, if you position the nub below the arm, the ship will sit nice and level. (The tilt is due to the weight of the ships, so a stronger print will have less of a tilt)

I printed PLA (eSUN PLA+) with a gyroid infill at 15%, and no supports.

The screws I used were M4 x 16mm.

Mounting Instructions

Hook the rear top engine with the circular mount, and rest the grey plastic thing, next to the circular window, on the arm. See the video for an example.

Downards tilt - Good for when mounting high up on the wall

Rest the centre nub on the grooved centre part of the mounting arm, this should cause the ship to have a slight downward tilt (see images)
NOTE: The strength of the print will greatly affect this, a stronger print will have less of a tilt.