内凸支架 FMS FCX18 LC80

INNER FENDER FOR FMS FCX18 LC80

2024-01-16 09:21:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

内凸支架 FMS FCX18 LC80

内凸支架 FMS FCX18 LC80

Summary

3D MODEL DESCRIPTION
A lightweight(about 12g/pcs) full front and rear wheel fender with side skid makes your FCX18 LC80 chassis look awesome!

It only designed for SwingRC LCG Shock Mount below, NOT directly compatible for stock shock tower.
https://cults3d.com/en/3d-model/game/fms-fcx18-lcg-shock-mount-swingrc

Please upgrade FMS FCX18 LCG SHOCK MOUNT by SwingRC first, thank you!

[ Test Run Video ]
https://youtu.be/Ob81djxvCEc

Get a FCX18 LC80:
https://www.fmshobby.com/en-kr/products/fms-1-18-fcx18-lc80-toyota-land-cruiser-80-rtr?ref=Gu8gzLpI58eKYw

https://www.facebook.com/groups/swingrc/

3D PRINTING SETTINGS
Print with PLA/PETG.

We provide a anti-wrap version stl for you if you have any wrap problem.

Tips for Pefect Slicing in Cura:

Add anti-wrapping objects at the thin wall corner with Tab Anit Wraping or Tab Plus shown as FCX18-InnerFender-AntiWarp.stl
2.Support Line Width and Support Interface Line Width: 0.2mm
3.Bottom Pattern Initial Layer: Concentric
4.Connect Top/Buttom Polygans: checked
5.Enable Ironing: checked / Iron Only Hightest Layer: unchecked
6.Infill Density: 20% / Connect Infill Lines: checked
7.Build Plate Temperature: 55~60
8.Print Speed: 30mm/s , Initial Layer Speed: 20mm/s
9.Support Placement: Everywhere ; Support Overhang Angle: 70;
10.Support Pattern: Zig Zag
11.Support Density: 8% ; Support Wall Line Count: 0
12.Support Z Distance: 0.2mm; Support X/Y Distance: 1mm
13.Support Interface Density: 40%
14.Outer Wall Wipe Distance: 5mm; Print Thin Walls: checked
15.Combing mode: Not on Outer Surface
16.Avoid Printed Parts When Traveling: Checked
17.Keep the interface line and the bottom fill line perpendicular to each other, not parallel.

Addtional parts:

M2 10mm screw bolts x 4

内凸支架 FMS FCX18 LC80

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载