ISE原型控制Wi-Fi接收器外壳
ISE Proto Throttle Wi-Fi Receiver Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of the proto throttle wi-fi receiver case from Zephyr334.
I used the original concept, but rebuilt the CAD file. I am using this box for a few other model RR electronics cases, as a standard size.
Changed the case screws to 2-56. This case needs 3 as the 4th hole is covered by the screen enclosure.
Need to clean the through holes with a #41 bit and the bottom holes with a #52 followed by a tap if you want, or just go slow.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra 2
- Rafts:No
- Supports:No
- Resolution:0.25
- Infill:20%
- Filament brand:
HatchBox
- Filament color:
Black
- Filament material:
PETG
- Notes:
Bed Temp 80c
First layer 250c
other layers 245cdid use a brim to prevent edge curling. It mostly separates when you pull the print. Edges sanded to remove sharp edges.
License
ISE Proto Throttle Wi-Fi Receiver Case
by tucstrlly is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
热门推荐
-
鸟夜灯2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
KABA DORMA 钥匙盖 3D模型2023-04-27 -
Gridfinity 花瓶款式容器2024-01-14 -
复制版Hayden章鱼模型2024-04-04
最热下载
-
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16 -
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02 -
幻想磁力2024-05-03 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17
最新模型
-
Fcm书签2024-05-08 -
Fractal Design Define R6 标准12mm按钮基座2024-05-08 -
BabyBuddha哺乳器支撑架2024-05-06 -
T-28 鼓鼻减重架加固2024-05-06 -
欧乐B牙刷架，适合两支牙刷2024-05-06