ISE原型油门接收器用于NCE案例

ISE Proto Throttle Reciever for NCE Case

2024-01-16 11:31:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a case for the Iowa Scaled Engineering (ISE) Proto Throttle NCE receiver.

Use 2-56 screws in the 4 corners to hold the box together.
Drill out the clearance holes in the print with a #41 drill
Lightly drill with a #50 drill the bottom holes and tap with a 2-56 tap or just be gentle with the screws in the plastic.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
20%
Filament brand:
HatchBox
Filament color:
Black
Filament material:
PETG
Notes:
Notes: Kobra 2-Pro (not available from list)

Bed Temp 80c
First layer 250c
other layers 245c

did use a brim to prevent edge curling. It mostly separates when you pull the print. Edges sanded to remove sharp edges.