圣诞树顶装饰物挂钩
Christmas (X-Mas) Tree Topper Holder
2024-01-16 12:15:12
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Christmas (X-Mas) Tree Topper Holder
This is a simple design that can be used with a Christmas Tree Topper to hold it in place at the top of the tree.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
- Resolution:0.28
- Infill:20% for Cap, 50% for Stem
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA
- Notes:
Print the Cap with 20% infill and the Stem with 50% (or higher) to provide the best strength for the parts.
Post-Printing
This is printed in two pieces and it may require gluing together but I suggest trying it first to see if that step is necessary.
- Use Zip Ties or Velcro Straps to attach the Stem part to your tree.
NOTE: Do not overtighten or the Stem could snap. - Place the Cap into the "Cone" part of your tree topper.
- Fit the square top of the Stem into the square hole of the Cap.
Tags
License
CC BY-NC-SA
Christmas (X-Mas) Tree Topper Holder
by SLiR is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
老板螃蟹 KGC-0102023-09-08 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09 -
自行车钥匙扣2024-01-05
最热下载
-
车身RC 1/10 全套2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
丰田22RE发动机Starer电机2025-08-08 -
罗技K400键盘壁挂式支架2025-07-27 -
模块化笔筒链2025-07-19 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15