简洁型 2280 SSD架

Simple 2280 SSD Rack / Box

2024-01-16 23:11:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A little rack that I put together for my 2280 SSD collection.

There are 2 types of trays - flat (because my green filament had horrible adhesion problems) and ventilated.....just to reduce weight and filament use.
There are 4 sizes of trays. The rack holds 2x 3mm, 14x3.5mm, 12x5mm and 2x drawer with lid

I colour coded mine for NVMe and SATA, but the rack is actually symmetrical.

Apologies about the lid - it is an interference fit. So it feels like it won't work to start with but after putting it on and off a few times it is satisfactory. Also it makes a nice stand to tip the box up (keeping the trays from falling out) when you're using it.

Printed on Aquila X2 in various brands of PLA. The only thing that needs supports is the channel for the drawer lid. Everything else can be oriented to print without supports.