手掌版触控面板（32x100mm）

Fingerboard 32x100mm

2023-03-26 18:01:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

INFO:

This board is compatible with regular Teck Deck trucks, and should work with many other trucks.

This is a flat blank that uses a mold that will shape it into its correct shape.
nMold Used:
https://www.thingiverse.com/thing:4426394/comments
nUse the 98x32x50x25x3_Shaper_Plate.stl
nI recommend Using a vice for this

The Press doesn't need to be 100% infill, only the board/deck does

DIRECTIONS:

Once the Deck is finished, unstick it from the bed, but leave it still on the bed, and heat up the Deck to around 75C for Pla, in order to soften it. (I recommend using your printer's heated bed for this)
nOnce you let it sit on the bed at around 75c for a couple of minutes, put the deck in the mold and clamp it down. (You don't need to clamp it tightly, the heat will mold it)

Wait a few minutes for it to completely cool down, and there you go, you've got a finished deck.

For Abs, heat up your bed to the temperature that your material starts to become more plastic/bendable.

手掌版触控面板（32x100mm）

朋友，你觉得上面这个模型，属于下面的哪个分类？