可调节式摩托车手机支架（161 X 77 X 14mm空腔）

Articulating motorcycle cell phone mount (161 X 77 X 14mm cavity)

2024-01-17 11:49:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

If you want a specific size for your phone, message me and request it and I will upload one for you. This one is 161 X 77 X 14mm.

This is a quick and easy cell phone mount for any motorcycle or bicycle with 7/8" handlebars. It is designed for a Google Pixel 4A in a small case, but it can be adjusted to fit just about any phone. I included the FreeCAD file which has a "parameters" spreadsheet which will change any dimension in the drawing by simply changing a number.

All bolt sections are for metric 6mm bolts. The pivot sections are countersunk to make clearance. The top bolt should be a M6X12mm or 6X16mm. The side bolt will be an M6X30mm. The pinch bolts are socket cap screws. The hinge is nothing more than a section of 1.75mm filament. I melted the ends flat with a soldering iron to hold them but glue will work fine.

I HIGHLY recommend making the handlebar clamp and the swivel mount (phone mount base) out of TPU with about 25% infill to reduce vibration that could damage your phone's camera. The top can be made from PLA or PETG.