壁挂式电源固定架

Wall-mounted power brick holder

2024-01-18 09:44:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created this wall-mounted power brick holder for a 48V power supply for a PoE switch for some security cameras. It will live on the OSB-covered wall of my garage, so a screwed-on holder was preferable to using double-faced tape or some other mounting strips. This way, if I need to replace the brick, I can simply drop a new one in.

The bottom of the holder is designed to allow entry of a standard C14 power plug (centered), while the other end is wide open. The holder is not intended to fully enclose the power brick. In my setup, about 40% of the upper end of the brick will be exposed.

The brick in question has the following dimensions (in millimeters):

Length: 133
Width: 51
Depth: 33

If your brick is a different size, you can resize this model in your slicer without too much trouble. That being said, if you change the dimensions too much, you risk distorting the screw holes to the point that they won't be useful to you. If you need something drastically different, consider altering the mounting ears in a 3D CAD program.

I designed this for my own purposes and I am sharing it in the hope that it will save someone else the time and trouble of designing one of their own. It is provided AS IS. If it doesn't directly address your needs, you are welcome to modify it to suit your application, but I will not post variations.