罗密欧多尺度重建增强现实数据集模型
Romeo_MSR_ARD
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is an addon to the Romeo MSR. At first it will feel like it does not fit, but keep trying and it will pop in. If you are still having issues, try seating it, then remove it and rotate it, and try again. Eventually it will wear just enough material down to have a flush fit. Once you have seated it, it should be able to be removed fairly easily.
The InCap print will remain inside the original scope cap. (still seat it inside the scope first)
The InScope print will remain inside the scope its self.
The print may need to be reseated occasionally.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:100
License
Romeo_MSR_ARD
by Alabuh is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Fidget Spinner - 单体打印 / 无需轴承2023-03-26 -
Sidewinder X1卷盘托架修补2025-06-20 -
电池间隔支架2023-05-06 -
HOTAS T.Flight 飞行模拱座椅支撑架2023-05-12 -
空气质量监测立方体六边形设计，监测二氧化碳、相对湿度和温度。2024-01-16
最热下载
-
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
猫咪零食球2024-03-29 -
18650电池存储盒2024-04-18
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
私密羞羞娱乐骰子2025-07-15 -
大码动漫女战士2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
苍井空老师全身像苍井空跪姿2025-06-27