Coolaroo遮阳伞衬垫/替换盖
Coolaroo Sun Shade Replacement Cap
2024-01-18 14:27:50
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a replacement cap for the rod that holds down Coolaroo sun shades, where the bungie attaches. Should fit snug, will need to tap the cap into the rod.
Print flat side down with supports.
I also printed with 4 walls for extra strength as the wind can be kind of crazy here.
We'll see how it does in the sun. Maybe a plastic other than PLA would be a good choice, but so far so good in full sun!
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 SE
- Rafts:No
- Supports:Yes
- Resolution:.20
- Infill:80%
License
CC BY-NC
Coolaroo Sun Shade Replacement Cap
by citricguy is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
旋转的正方形时钟2023-03-26 -
科幻复制品：Rick and Morty的太空飞船2023-03-26 -
复古风格闹钟架2023-03-26 -
橡皮筋织物装置2023-09-09 -
Steampunk Union Steam Hurlant2024-03-29
最热下载
-
Articulated Snake2024-03-30 -
空客操纵杆配备控制杆固定装置2024-03-30 -
浴室排水器2024-04-07 -
用于RRD通用型70182电机的mayrc maytech桅杆夹2024-04-20 -
超越IPD板2024-05-03
最新模型
-
纹身瓶托设计2024-05-08 -
优尼斯特牌小型墙支架2024-05-08 -
Nylint 更换屋顶组件2024-05-08 -
Reolink Duo 2/3电池适配器2024-05-08 -
Jenga盒子2024-05-06