2.5英寸灰尘收集管道挂架

2½" Dust Collection Hose Hanger

2024-01-18 15:27:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Just as the title says, this is a hanger for 2½" dust collection hose for power tools (table saw, band saw, etc.). A channel for a zip tie is provided to secure the hose to the hanger.

Print this with the back plate facing down. The hook portion is a significant overhang, so you will need supports. I went with Tree type. Support is also used for the hole that allows the zip tie to pass from the underside of the hook to the top of the hose.

After printing, you will need to dig a small amount of support material out of the zip tie channel where the hook meets the back plate. I used a combination of slot-type mini screwdriver and X-Acto knife to accomplish this.

The screw holes are 4.5mm in diameter with an 8mm diameter 82° countersink, suitable for #8 drywall screw or similar. I mounted mine to OSB. You will need to work out what you'll need as far as anchors, etc., if attaching to another wall material.

I used 20% Gyroid infill for my print, but you don't have to. Just be sure to use a type and percentage that can provide some strength and stability. Dust collection hose isn't particularly heavy, but every shop sees tugs and bumps, and this is a structural part.