侧边纤维喷嘴SW-X2模型

Side Filament Feeder SW-X2

2024-01-19 01:29:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The original Side Filament Feeder (link below) combined both original "Top Parts - Frame Piece" and the updated "Top Parts - Wheel and Sensor Piece", but I wanted just the updated "Top Parts - Wheel and Sensor Piece".
https://www.thingiverse.com/thing:5599572

Other than that, fits well, I would suggest betting slightly longer bolts to attach to the frame as they don't sit in very far.

On the picture you'll see the old system still in place, I have two of these printers so just made one to test first, tested no issues.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X2
Supports:
No
Infill:
20%

How I Designed This

I used Tinkercad to make a square Hole to remove side of the updated part, then merge with the original part to get the joint side that fits with the original Frame Piece.