Begode EX30 Handle Covers (Front and Rear)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Custom handle covers for the Begode EX30. Created with Tinkercad.
The added dimension is easier on the hands while lifting this heavy beast of a machine, especially for the thin front handle. Using TPU with low infill settings adds some squish to the handles, and Cura's "fuzzy skin" setting adds grip, making lifting the EX30 a lesser pain :)
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:.6mm Nozzle and .2mm Layer Height
- Infill:~15% Gyroid
- Filament brand:
Blammo
- Filament color:
Plaid
- Filament material:
TPU
- Notes:
Printed with 2 outer walls. Gyroid infill is excellent for creating "squish" using TPU, especially at lower percentages. Print standing on end with a brim and a heated bed. Cura's fuzzy skin makes a great texture for grip. The covers fit snugly and don't freely spin on the handles.
Post-Printing
I would imagine that over time the handles could become loose from use, wear, temperature change, etc. So it may be a good idea to glue them in place, as loose handles could cause your grip to slip.
Tags
相关内容
联系我们
热门推荐
-
Gillette吉列剃须刀架2025-07-14 -
Toyota 22RE发动机扩展套件2023-03-26 -
圆柱形钥链配摇柄2023-07-27 -
丰田RAV4车门座椅夹板螺栓更换2024-04-20 -
eGPU外设机箱设计用于UT3G2024-04-29
最热下载
-
Arduino或5V继电器控制板固定架2024-04-02 -
法兰尺寸测量工具（小）2025-07-16 -
幻想磁力2024-05-03 -
线框无心2024-05-08
最新模型
-
艺术雕像（女性）2025-07-16 -
沙箱建筑模型2024-05-08 -
工匠系列V20 18Ga 无绳式钻枪夹持架挂件2024-05-08 -
福特OBS后部车厢地板插头2024-05-06 -
克勒普顿卷线器2024-05-06