货架底座固定架，用于TP-Link UH700 USB扩展器

Under shelf holding bracket for TP Link UH700 USB Hub

2024-02-04 13:09:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Under shelf holding bracket for TP Link UH700 USB Hub

The bracket is designed to hold a TP Link UH700 Hub under a table, bookshelf, etc. There is spacing between the bracket and Hub to allow for any heat dissipation. With this design there is no access to the power switch and only one of the two charging ports.

!!!!! IMPORTANT !!!!!!!!

When installing the unit make sure that the Hub power is on!

Note 1

Supports are recommended for the bracket but not the spacer. Suggest tree or organic with touch build plate only.

Note 2

The spacer is not essential but recommended as it holds the hub from moving while providing a space for heat buildup at the top of the USB Hub to dissipate. Two sizes are provided 3.25 MM (one hole) and 3.5. MM (two holes). Suggest you try the 3.5 MM first. The height can be increased or decreased prior to slicing if you want to make it fix more appropriately.

Note 3

With this design there is a loss of access to one charging port and the off/on switch. If this is critical to your use of the hub it should not be too difficult to remixing the design by modifying it to accommodate the hub in an upside down orientation.

Mirror the design along the long axis, punch out a access hole on the bottom to be able to use the off/on switch, make the unit higher so that thinner screw tabs can be used and cut out the area around the charging ports so that they can be used. Suggest centering the screw Tap above the charging ports so that it is symmetrical with the tab at the opposite end.

The power switch and charging points were not an issue for me. I had the unit designed and printed before I realized that a simple fix was available.

APPROXIMATE ONLY

Item Time Filament

Bracket 4.3 hr 15 metres
Spacer 27 m 2 metres