哥斯拉超级巨人 / 斯坦恩皮纳球

Godzilla extra flying saucer / Stern Pinball

2024-02-04 19:55:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

哥斯拉超级巨人 / 斯坦恩皮纳球

哥斯拉超级巨人 / 斯坦恩皮纳球

Summary

Another flying saucer mod for the Godzilla pinball machine.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.08
Infill:
20-100
Filament brand:
Sunlu
Filament color:
grey and transparent
Filament material:
PLA
Notes:
This is a remix of my other flying saucer mod. The saucer was changed so you can attach a spring with a diameter around 8-9mm and a LED light.

Print base, cap and the small windows with transparent filament and a layer hight of 0.08.
For the cap, windows (6x) and balls (6x) for the bottom part you should use a brim to stick to the bed.

The saucer top, bottom and the clamp can be printed with any other filament and color.

The 6 small windows can be pressed into the holes of the top and hold without glue.
Cap, the six balls for the bottom part should be glued.

The holder should be printed with 100% infill. For the light I used this one:

https://www.amazon.de/dp/B08G4YFGPM?psc=1&ref=ppx_yo2ov_dt_b_product_details

Feed the wires through the hole and hot glue the LED. You may have to extend the wires a bit and connect them with alligator clip to on of the GI bulps.

Tags

Godzilla mod pinball stern UFO

License

CC BY-NC

Godzilla extra flying saucer / Stern Pinball
by fuzzelhjb is licensed under the Creative Commons - Attribution - Non-Commercial license.

哥斯拉超级巨人 / 斯坦恩皮纳球

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

经典数字密码保险箱
2023-03-26
Jura Impressa C5咖啡锅容量扩展器
2023-04-06
面板视图19英寸立架模型
2024-03-14
3D模型: Lula
2024-04-07
AOS 5 O3 无人机天线架 + Foxeer GPS 定位架
2024-04-23

最热下载

最新模型