3dsjs

SFU1204型号的NEMA23级别螺丝支架

SCREW SUPPORTS SFU1204\ BRACKET NEMA23

2024-02-04 20:25:16

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

say thank you financially https://www.donationalerts.com/r/proklyatiyebomzha
screw supports sfu1204\ bracket nema23

secured with M5 screws, 4 screws per block.

M4 threaded bushings are required to install the bearings and motor.

distance between mounting holes 45 mm, for aluminum profile 45 series

Attention, nema23 engines can heat up above 80 degrees, use ABS plastic or another with heat resistance above 90 degrees

Print Settings

  • Printer brand:

    Flsun

  • Printer:

    Flsun Super Racer

  • Rafts:
    No
  • Supports:
    No
  • Infill:
    50+
  • Filament brand:

    -

  • Filament material:

    abs/pp/nylon

Tags

License

CC BY

SCREW SUPPORTS SFU1204\ BRACKET NEMA23
by proklyatiye is licensed under the Creative Commons - Attribution license.

SFU1204型号的NEMA23级别螺丝支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢