库普 K16A-B V2 安装支架

Kulp K16A-B v2 Mount

2024-02-04 22:46:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This mount for the Kulp Lights K16A-B v2 is a remix of the original mount by Hermy21. This has been modified to better fit the v2 version of the K16A-B, however will still hold the original v1 board perfectly as well. Use M3 screws to attach the K16A-B to the bracket.

Also included is a mount for attaching the K16A-B on top of 2 HP server power supplies. To attach the 2 mounts together, insert 2 M4x10mm hex-head bolts into the bottom of the PS bracket, and secure the K16A-B bracket using washers and M4 nuts

Print Settings

Notes:
Supports are required for printing the K16A-B mount, but not needed for the HP power supply mounts as long as they are printed with the back-side down.