章鱼基座模型

Octopus Base

2024-02-05 00:10:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a configurable base for the Tentacle System. Used in combination with the Tentacle Connector Kit, you can build a durable base to hold up to eight tentacles.

There are two regular ball bases and six stumps that each end in a pin compatible with the Connector Kit.

The shape helps keep the center of gravity in a position to stabilize a longer tentacle. If necessary it is easy to add weight to the opposite side, for example with a series of washers or nuts slid over an extension, or attached to a magnetic grip.

You can arrange a collection of grips and rotate the entire base to bring the most useful ones into your workspace. You can pick up the entire collection by the head with a single hand to move or store it.

Googly eyes are optional, but recommended; however, they should be different sizes.

This was printed using the Spool Rotator with Plasport emerald/purple/yellow coextruded Silk PLA filament.

You can learn all about the Tentacle System here: https://3ddoodle.com/tentacle-system/