PTC温度控制暖气架 Saturn 3超级型号 (Elegoo)

PTC Heater Stand Saturn 3 Ultra (Elegoo)

2024-02-05 00:24:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I want dual heaters and I wanted the warm air blowing into the chamber. Also LED display pointing away from my resin. Positioned not too high; cause heat rises and not too low that it blows directly on the tank.

I don't use the carbon block things. So I removed them and put in a hand made PCB thing with holes that match the USB mounts to hold XT60 plugs and externalized the power in through the vent grill. Now 12v 12ga.

This is where I found the PTC heater enclosure.
https://www.thingiverse.com/thing:3442165

There are videos on how to make it and some good tips.

Original designer. https://www.thingiverse.com/x3msnake/designs