Enders 3 V2型号跑出传感器导线导引装置 - 完全打印完成

Ender 3 V2 Runout Sensor Filament Guide - FULLY PRINTED

2024-02-05 12:20:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Please post a make if you print this! I love seeing people make my designs!

This is a fully printed filament guide for the Ender 3 V2 with the Creality runout sensor kit installed. May fit other Ender-series printers as well, but I can't be sure. Clips onto the sensor's mounting bracket and the back of the sensor itself to hold it securely in place. No extra hardware needed. Just remove your sensor, put this in place, and put the sensor back on. Done and done. The opening will fit a 4mm OD Bowden tube snugly. Depending on your printer's settings and capabilities, you may need to clean up the hole a little bit to slide the Bowden tube in.

I recommend printing at 99.99% infill in concentric pattern for maximum strength and time saving. Only took me about an hour.