泡沫之杯
Soap Cup
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a basic soap cup with dimensions larger than the soaps I had at hand, so gripping the soap should be easy. It doesn't float. The ribs and holes are there so that water should run out and the soap therefore dry quicker.
You can print it at lower infill than 15%, but some weight is a benefit.
Feel free to suggest improvements and I'll make a new model.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 SE
- Rafts:No
- Supports:Doesn't Matter
- Resolution:0.10 to 0.20
- Infill:15%
- Filament brand:
PolyMaker
- Filament color:
Fossil Grey
- Filament material:
PLA
- Notes:
You can lay the model flat and sink it so that the feet are under the plane for an easier and quicker print (provided you don't need the feet that is).
Post-Printing
Post-processing
Considering the use, you might need to get rid of some sharp edges using a burring tool or sand paper, but the model itself consists of no such things.
Disclaimer: PLA is deemed safe for this kind of use, but depending on filament you use, or possibly allergy, that might not be the case for you.
相关内容
猜你喜欢
联系我们
热门推荐
-
Cyborg Beast2023-03-26 -
手枪弹匣（边缘型）3/4部分2023-05-01 -
Neutrik SCDR防护罩/外壳2023-08-25 -
巨魔头像 012024-04-21 -
Casio SK-2100麦克风外壳2024-05-08
最热下载
-
车身RC 1/10 全套2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
比基尼模型2025-07-16 -
天使和恶魔2025-07-16 -
原神优菈2025-06-27
