模块式机器人真空器台阶设计

Modular Ramp for Robot Vacuum

2024-02-18 13:11:48

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

TWO PROBLEMS I attempted to solve with this build:

We have a tiny tile lip (about 1 inch tall - 27.5 mm to be exact) that separates the dining room from the kitchen and our robot vacuum used to make attempt after attempt to get into the kitchen (arguably the floor that needed cleaning the most) and then ultimately surrender to the tile and turn sheepishly in the opposite direction.
I have a 3D printer that I love but that has a very small printer bed.

SOLUTION: Modular Ramp Designed with Robot Vacuums in mind

Now, our little robot friend can clear the barrier and get into our kitchen to continue its cleaning pursuits.

There are six parts included in this make:

Each Piece is 75 mm wide (approx 3 in)

RECOMMENDATIONS:

Print the 2 left, and 2 right (no dovetail ends on their left and right sides, respectively)
Print as many center piece sets as you need for your space (measure your space width, then divide by 75 mm (3 inches) and subtract 2 (for the left and right pieces you will use) this will give you the total sets of the center pieces you should use.

The dovetail cuts are snug to ensure everything is firm and so you may want to tap gently with a hammer to assemble.

May your house be a little less dusty and sparkle a little more.

God bless.