二氧化硅凝胶丝筒储存容器

Silica Gel Spool Jar

2024-02-18 13:12:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was unhappy with any of the designs I found on here so I made another new one. The jar is designed to print faster and only needs a touch of support for the threads.

It fits inside of all of the spools I have on hand.

I am filling it with cheap amazon silica gel and it takes about 80g of material to fill.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
N/A
Filament brand:
Any
Filament color:
Any
Filament material:
Any
Notes:
You do not need supports on anything but the threads with standard 0.2mm layer height and a 0.4mm nozzle with 0.4mm line width. You may need to use support blockers in your slicer depending on how you apply the supports. If you drop the layer height and increase line width a little you can avoid any support at all.

With cura 5.6.0 I didn't need to place support blockers but this will depend on your settings. All angles outside of the threads are greater than 45 degrees