KP15枪托备用螺丝夹持器

KP15 Buttstock Spare Bolt Holder

2024-02-18 13:12:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a bit shaped to fit the interior cavity of a KE Arms KP-15 lower with a trap door floorplate installed. (available from Wraithworks and more recently from KE directly)

It has a hollow shaped to hold a standard AR .223/5.56/300aac/7.62x39 bolt. Handy if you pick the one off of this list that's famous for snapping off extractors.

I've included a blank plug, it just fills the cavity and is where I started. The parts for the functional bolt storage plug, and the bolt shape I used to create the negative space. It's oversized from a functional bolt to accomodate the tolerance of 3D printing.

If I remember correctly, I had to lightly sand the dovetail surfaces to get it smoothly working, but it might be better to just leave them as-is so they don't rattle around as much.