厨房/浴室架子安装支架（可定制）

Kitchen/Bath Shelf Mounting Bracket (Customizable)

2024-03-12 09:26:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a shelf mounting plate, which replaced the glue on transparent mount. These glue on plates are working great, but I wanted to cover unused screw holes. Unfortunately the tiles behind have dents, which, due to the unlucky placement, caused air gaps and the shelf started tilting downwards. The second shelf is still up and I added a picture of that, so you have a clue how it original looked.

However. I designed a plate, which now utilizes the screw holes I wanted to cover. Since the screw holes are in the middle I advice to use double sided tape behind the mounting plate, or the bracket will start bending, too. The plate I added has a more spread screw arrangement.

The included FreeCAD source file has a spreadsheet, where you can modify everything.

You need to print the plate and two times the mounting points. This way you don´t need any support, which would be hard to be removed.

I strongly advice to use ABS. Not because of the flex, but because you are able to weld the mounting points with a little acetone to the bracket. The bond is even stronger than any layer line. With other materials make sure your glue is doing its job. You can see the slightly smudged backside, where the ABS got melted. The quality does not matter as you cannot see the entire bracket once the shelf is slit on.