Cathedral-esk Wallpanel #1
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
The A1 is the center cross. A2 is the left and right crosses, A3 is the top and bottom crosses.
B1 is the triangular corner coming from the center cross. C1 and C2 are the triangular fillers that look like shafts of light meant to radiate from the crosses. You will ultimately need 4 sets of C1 and C2 per panel. D1 is the small corner square.
The Large Connector (Lconnector file) is used to lock almost every piece together.
The Small Connector is used for the D1 corner squares.
Glue is suggested to connect the pieces as well as putty or sticky gelatin for mounting on the wall.
I would print with whatever your preferred settings are. The panels can be shrunk or expanded according to your tastes but the connectors will need some alterations. It can also be put together with glue and no alterations. If you are having trouble with the fit then I suggest lightly sanding the sides or tightening your print settings. They were made with a slight gap to facilitate fits better but ultimately (as with any puzzle of a print) it falls to the machine to accurately form the panel pieces.
On pretty much every main form of social media my profile is @ printingwithyou
Hope you have a great rest of your day and you enjoy the wall panels. If you do print them, I'd love to see what color combination you went with.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Vallejo 42 绘画存储库2023-05-18
-
Volvo C30/S40/V50手机支架配备CD插槽2023-09-06
-
大师之剑护鞘(来自《塞尔达传说》)2024-01-14
-
可爱的婴儿恐龙在蛋里2024-03-31
-
兔肉图表模板2024-05-01
最热下载
-
3D机器人手臂模型2023-03-26
-
ZTE MU5001 上位电容器2024-01-10
-
3D模型标题1:kp3s orca slicer2024-04-07
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
-
Enders 3版控制面板2024-05-08
最新模型
-
跨维度外推器 - CW的闪电模型2024-05-08
-
PS4轻型版桌下挂架2024-05-08
-
保时捷9352024-05-08
-
万用表壳2024-05-08
-
波斯王子标志2024-05-06