Janklife E-108 GrindPen携带器

Janklife E-108 GrindPen holder

2024-03-13 13:59:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of mkroman's case for the Qianli iHandy DM360 grind pen. He uploaded a F3D file of the base so if you want to remix it for another grind pen go to his.

https://www.thingiverse.com/thing:6377691

Mine is just missing the corner holes for magnets (since I made a friction fit lid) and the cavity for the pen is a little shorter. My lid would fit his base.

The base should be made of any normal filament, I used PLA. The lid should be a flexible rubbery filament like TPU.

The pen cavity on mine is the perfect length for the included allen key to be stowed in the bottom.

EDIT: The Case V6 file is taller than the original since I noticed the pen sticks up quite a bit above the top on the original.