盐和辣椒粉摇匀器更新版

Salt/Spice Shaker updated

2024-03-13 14:00:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Explore the updated and improved 3D model of a Salt/Spice Shaker on thangs.com, meticulously crafted by expert designer Skip Goebel. This home improvement item stands apart from its previous version, not only in terms of design but functionality as well. The original model has been replaced with an enhanced and double-tested 3D design to assure users of its quality and precision. Check out our post-processing tips for detailed guidance and to achieve the best output from this 3D model. Unleash your creativity with this 3D model of a Salt/Spice Shaker and bring a touch of modernity to your kitchen gadgets. Perfect for those passionate about home improvement decor. Get an up-close look by referencing the detailed images provided. Experience 3D modeling like never before on thangs.com!

Original model at thangs.com: https://social.thangs.com/m/1030385

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
10%
Filament brand:
elegoo
Filament color:
silk, gold and black
Filament material:
pla silk
Notes:
The holes are elliptical so humid salt doesn't clog too much. If so, a few added dried peas will help.
the cap has internal cavities so you may have to experiment on what angle you put on the bed.
I have a lot of tableware with the llama logo and people like it. Yes, it is designed and made-here in Peru. (mot Chinese)
If you make it in petg, you should go with fine settings and lower you flow, probably 75%

Post-Printing

hot water

getting a tight fit on the top is best achieved by putting the bottom part in very hot water, then push it on. if that is too loose, build up with nail polish or hair spray.
after you fill it, hit with light coat of hair spray and stick together. if needed to take apart-pour boiling water over it and pull apart.
use a laundry marker on embossments- i do it with a small series of dot taps.