Nema17型线驱动线性马达配带弹簧耦合器

Nema17 Linear Actuator with Couplings

2024-03-13 20:25:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Linear actuator for Nema17 motors with tripod mounting hole. The rack can be coupled with different holders, some examples are provided such as retroreflector, heart, and also the base holder is provided to design your own based on your needs.

Use of the actuator

This is part of a mechanical actuator to generate oscillations with configurable frequency and peak amplitude. The C code for the microcontroller to mount the whole system is available at [GitHub]().

What do I need to print?

The basic model is built with:

Linear_Actuator_Nema17_Holder
Linear_Actuator_Pinion_Nema17
Linear_Actuator_Pusher_75mm
Linear_Actuator_Base_Holder

The models:

Linear_Actuator_Retroreflector_Holder
Linear_Actuator_Heart
Are designed based on Linear_Actuator_Base_Holder and are provided for guiding purposes for designing your own parts.

Printing instructions

When printing, depending on your printer configuration, the mounting hole of the pinion might be a little to tight, use some tools to get it to fit. Besides, use some kind of oil to ease movement of the pusher or use some sand paper to allow it to move freely.

Attributions

This actuator has been built remixing from Thing ID:3170748 and Nema17 mounting bracket.
The 3D model of the heart was obtained from Thing ID:1541813.