Anycubic树脂托盘冲洗与固化3加持

Anycubic resin tray Wash & Cure 3 PLUS support

2024-03-13 21:07:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

FINALLY! RESIN TRAY AUTOMATIC WASHING...

it's a tool for Anycubic Wash & Cure 3 PLUS, with the aim of support Anycubic Photon X2 resin tray upright, in the alcol tank, without its basket, so letting the washing machine fully clean the dirty tray, a dream for me... ;-D

project is self-eplanatory, only I had to cut it in two pieces for my K1 bed measures, but is also easier to print.
you have to glue the central trusses together, and put M3 brass thread knurled nuts in both braces holes, and assemble it's very easy.

use appropriate M3 screws lenght, varying from 10 to 20mm, no matter exact lenght 'cause holes are passthrough, and accomodate also if are a bit longer. otherwise you can also use a longer screw passthrough all support and a bolt.

support measures are made to fit Anycubic Wash & Cure 3 PLUS, but I send also Inventor original files if you want to modify to fit other washer machines.

I think that this support will help you for (IMO) 80% annoiyng resin clean operations, and clean tank perfectly.

hope you enjoy it.

;-Dan from Italy