改进型火枪管配件
Improved Hammershot Barrel Attachment Lug
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I remodeled the old version of this by axelsorax because it had some issues and the STL was hard to edit. This version fits better, has better dart alignment, and generally looks sleeker.
Tested and works great with most attachments. Remember to always use barrel spacers for a tight fit and no wiggling.
There's a few noncritical issues I'd like to fix sometime in the future:
- dart alignment is still slightly low, making longer barrels inconsistent
- bore is slightly too small, so certain attachments won't fit (notably the chronobarrel)
- there's a few spots to smooth for better aesthetics
I haven't tested this with 7-shot barrels, but I suspect it'll work well due to the slightly higher dart alignment.
The carbine photo uses a stock attachment, which unfortunately requires a lot of sanding to get working.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:20%
- Notes:
Make sure to completely remove all remnants of the supports. Holes may need sanding, but the lug itself shouldn't.
Tags
相关内容
联系我们
热门推荐
-
ST150轮子螺母更换2023-05-01 -
KMOBrain 1:200火箭贴纸单元2023-05-02 -
3D数据可视化模型2023-05-13 -
最终派系平躺标识牌支撑2024-03-17 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04
最热下载
-
全能3D打印机测试2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
完全可打印的无人机框架2023-05-31 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
龙珠孙悟空，无需支撑2025-07-19 -
鞋带锁2025-07-17 -
兔女郎半身像2025-07-15 -
坏龙家的大宝贝女生别下2025-06-26