bosch cookit手柄和喷嘴

Handle and spout for the Bosch Cookit

2024-03-14 04:10:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Owners of the Bosch Cookit pot know it: You want to scrape dough out of the heavy pot, for example, but you don't have a third hand. You can only hold the pot by two handles. It would be easy if the pot had a handle opposite the spout.

Here it is.

Simply plug it into the lid holder and you can hold the pot comfortably with one hand (assuming you have muscles :-) )and scrape out the dough, goulash, etc. with the other hand,

The handle is ergonomic.

I sliced the handle with the Beta4 of Prusasclicer 2.6 (I now use 2.6 for all my models). This software version can handle organic supports.

The critical areas, where larger forces occur, I printed with infill modifiers with 100% infill.

The latest version and further details at https://www.printables.com/de/model/501234-bosch-cookit-ein-hand-griff-one-hand-handle

Print Settings

Printer brand:
Prusa
Printer:
i3 MK4
Supports:
Yes
Resolution:
0,15
Infill:
25%
Filament brand:
Prusa
Filament color:
black
Filament material:
ASA
Notes:
Smoothed with acetone
Use Infill 100% Modifier in heavily used areas

Post-Printing

Smoothing with ACETON

I hang the handle on a thread in a 200 litre barrel into which I have poured approx. 100 ml Acteton. After about 2 hours the handle is smooth. It has to hang in the air for a while after removal before you can touch it.

This makes the handle very smooth and easier to clean