全尺寸近距离读取器窗棂安装支架

Full size prox reader mullion mount

2024-03-14 12:06:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Needed to mount a full size HID RP40 to an aluminum storefront door frame. Should work with most other full size prox card readers or many other devices that intended to mount to a single-gang electrical j-box and are 120mm x 80mm or larger.

Of course I know that narrow mullion mount readers are available but this allows a full size reader to overhang the adjacent window/sidelight so long as the frame has about an inch to the glass. Integrated j-box for the cable splice so you don't have to drill a large hole in the door/window frame to stuff the cable back into. Looks much better than screwing a waterproof bell box to the frame. "Knock-outs" (actually drill-outs) around the perimeter in case it's necessary to pipe in with 1/2" conduit though some lock rings might be a tight fit.

Recommend printing in PETG or other durable plastic especially if outside.

Fusion 360 .f3d and STEP .stp files included