ASIAir Pro Ugreen M.2 NVME 无线网卡扩展架

ASIAir Pro Ugreen M.2 NVME plus Vonets Wifi Extender Bracket

2024-03-14 22:48:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100.

Ideally for mounting on the side holes.

2 verisons, 1 with offset holes, if like me, you're using a cable management solution like EwanV's ZWO ASIAir Pro Cable Tidy, having it offset just fits better.

May fit the ASIAir Plus (it's thinner and I dont have one to measure) but may interfere with the USB C / SD card slot - if anyone has the measurements, let me have them and I can make a Plus variant.

Best printed in vertical, cuts down on number of tree supports.

Print Settings:
Quality: 0.2
Walls: 4
Infill: 20%
Brim: Yes (Personal Preference)
Supports: Yes
Material: PLA

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament brand:
CopyMaster
Filament color:
Red
Filament material:
PLA
Notes:
Print Settings:
Quality: 0.2
Walls: 4
Infill: 20%
Brim: Yes (Personal Preference)
Supports: Yes
Material: PLA